86-752-8386168
Yanzhou Town, Huidong County, Huizhou, Guangdong, China (Mainland)
World-trend Click PVC Flooring Tiles
product parameters:
A.standard Size: 6"x36" (1''=25.4mm)
B.Thickness:4.0/3.0/5.0/mm
C.Wear layer:0.3/0.5/mm
D.Surface finish:Smooth embossed,deep embossed,handscrape feel,etc
E.Double UV coating and Bevel edge
F. Material:virgin
G,sound-absorbtion, anti-skip,waterproof, various decors for different decoration,
TECHNICAL DATA:
CHARACTERISTICS | TEST METHOD | RESULT |
Dimension | EN 427 | 152.4X1219.2mm |
Thickness-Overall | EN 428 | 3.0mm |
Thickness-Wear layers | EN 429 | 0.3MM |
Total weight | EN 430 | 17.8KGS/Box |
Peeling strength of layres | EN 431 | pass |
Shear forces of layres | EN 432 | good |
Residual indentation after static load | EN 433 | Mean value 0.01mm |
Dimension Stability | EN 434 | Shinkage <=0.002%,Curling <=0.2mm |
Flexibility-10mm mandrel | EN 435 | No Damsge |
Resistance to chemicals | EN 423 | Class 0 |
Bearing a castor chair | EN 425 | No disturbance Nodelamination |
Wear resistance | ISO 105 B02 | ≥6 |
Toxic | EN660 | pass |
Resistance to fire | EN71-3 | Complies |
Slip resistance | ASTM E84-03 | NFPA Class B |
Slip resistance | Adin 51130 | R9 |
Performance classification | En685 | 23,34,43 |
GB/T 4085 and GB8624 B1 | NA | pass |
CNTS 8907 | NA | pass |
ISO 9001 | NA | pass |
About Product Overall Specification for click series
Size: 6" ×36" (150mm*935mm)
7.25*48''(180mm*1220mm)
6" ×48 " (150mm × 1220m)
12''*24'' (308mm*600mm)
24''*36''(600mm*935mm)
Thickness: 3.0mm ,3.5mm,4.0mm,4.5mm,5.0mm)
Wearlayer Thickness: 0.2mm,0.3mm,0.5mm, 0.7mm
UV Double coating to Ensure good Scratch Resistance
High accuracy measurement :
Length=36inch (1''=25.4mm)
Width=6 inch(1''=25.4mm)
Steady Quality can meet international standards:
Deliver time:30days to 35days
Free samples can provided to our customer.
MOQ:20 ft Container
Payment:T/T (30%T/T when order, and Balance after B/L Copy.)
Price based on FOB shenzhen Port
About certifiacte
· ISO9001 Quality Control System,
· ISO14001 Environment Control System,
· CE and EN certificate
· REACH ,ASTM and Low VOC certificate
· FLOORSCORE certificate
· IMO certificate
To better know about PVC-installation:
1.1 How to condition (acclimate) your floor?
1.1 Your luxury vinyl planks should be stored in the room they are to be installed for a minimum of 48 hours prior to installation. During this time, the planks should remain in the carton on a flat surface, and the room temperature should be maintained Consistent between 68 and 77F (20 to 25 degree C).
1.2 How to prepare your subfloor?
Make sure that your subfloor is smooth, flat, dry, clean and solid: - Carpet staples or adhesive residue should be removed prior to installation - Subfloors should be flat within a tolerance of 3/16”(4.7mm) over a span of 10 feet. Any unevenness over 3/16”(4.7mm) must be sanded down or levelled with a floor leveler. Voids or humps in the subfloor will prevent the planks from locking properly. - Although these luxury vinyl planks are water-resistant, they are not to be used as a moisture barrier. Your subfloor should be completely dry prior to installation of the vinyl floor. New concrete subfloors need to cure for a minimum of 60 days. - New concrete slabs must be thoroughly dry (at least six weeks) and completely cured. The final responsibility for determining if the concrete is dry enough for installation of the flooring lies with the floor covering installer. - Ceramic tile should be made smooth by applying a cementious overlay such as patching or leveling compound to smooth out grout joints
1. When installing the luxury vinyl plank you must remember to leave a 6mm gap around the perimeter of the room. When first starting the installation you can install against the wall and after 2-3 rows, adjust the distance from the wall by 6 mm and insert spacers to maintain that gap. Begin installation in the left corner remembering to leave a gap of 6mm from the left wall.
2. Insert the end section of the next floorboard at an angle to the first one, then lay down. Complete the first row in the same manner.
3. Place the final floorboard face down and the short side without the locking strip towards the wall. The distance to the wall should be 6 mm. Mark where the floorboard is to be cut.
4. Start the second row with the leftover cut part of the last plank of the previous row. The starter piece should measure at least 30 cm (12"). If not, start with a new plank and cut it larger than the required 30 cm (12"). Please note that end joints should always be at least 30 cm (12") from each other from row to row.
5. Place the floorboard at an angle against the floorboard in the previous row, press forward and fold down at the same time.
6. Place the short end of the floorboard at an angle against the previous installed floorboard and fold down. Ensure that the board is positioned in the integral locking strip of the floorboard in the previous row.
7. Lift both the current as well as the previous plank from this row, push to slide the current plank against the row in front so it aligns with the previous plank. The current and previous plank can now be folded completely down to horizontal position.
8. After 2-3 rows: adjust the distance to the front wall by placing spacers of 6mm. Keep the spacers in position during the entire time of installation and remove once the installation is completed.
9. If the wall is uneven, the floorboards must be adapted to its contours. Mark the floorboards with the contour of the wall. Do not forget to leave 6mm of gap from the wall. This procedure shall be used also for the first row
Valingue License for Producing Click floor
Product advantages :
Check in details about the click instruction
Click type-2G
About package: Carton box + Pallet
If you want to get more information about our products, please feel free to contact US! thanks!
